Bus Bar for Industrial
Brochures
-
Motor Drive Bus Bar
Thin copper conductors, separated by insulation material of only thousandths of an inch, provides the ultimate in low inductance for IGBT-based motor drives. Incorporating electrolytic capacitors into the same structure simplifies packaging, and reduces the effects of transient overshoots. Note the addition Snubber Capacitors and Resistors built into the laminated bus bar.
Size: 7” x 9” | Thickness: .040” | Voltage: 475VDC | Current: 150A
-
Capacitor Bus Bar for Motor Drive
Six electrolytic capacitors are easily connected to this edge sealed, two-layer laminated bus bar providing a low inductance power path for a low horsepower, variable speed motor drive. Note the use of a bonded insulator strip along the length of the bus bar to provide additional “creepage” protection between the plus and minus terminals.
Size: 1.8” x 6.3” | Thickness: .040” | Voltage: 480VDC | Current: 60A
-
Fork Lift Truck Bus Bar
Six-conductor, laminated bus bar assembly combines DC and AC bus bars, as well as a fuse link, all in one compact package. The system is designed to fit perfectly in a limited space and provides power to a variable speed motor in a rugged industrial environment.
Size: 7” x 7” | Current: 150A | Voltage: 42V | Conductors: .060”
-
Variable Frequency Drive
This simple, yet complex design incorporates DC and AC bus bars, plus accommodations for three current sensors at the AC output points, all built into a flexible, geometric package designed to fit into a tight, confined operating area.
Size: 10” x 15” | Current: 100A | Voltage: 550VDC | Conductors: .040” & .060”
-
Rack Mount Power Distribution
Mounted inside a circuit breaker power tray, individual bus bars are nested in a machined FR-4 frame to provide output connections. This assembly assures proper safety separation as well as single component installation.
Size: 6” x 12” | Voltage: 48V | Current: 280A | Conductors: .125”
-
Laminated Bus Bar With Hinged Connection Joints
Innovative laminated bus bar with hinged connection joints allows ease of access to components such as IGBT and capacitors installed under the bus bars in tight assemblies.
This robust and effective bus bar design reduces inverter stack assembly foot print as well as cutting down on maintenance time.Size: 7.1” x 7.2” | Voltage: 2500V | Current: 150A
-
Motor Armature Bus Bar
This three-layer bus bar is laminated with a mold-sealed construction and has nine “crown clip” power connectors that distribute power from the power supply onto the backplane. Glass mounting supports are bonded to the structure creating a rigid installation.
Size: 20” diameter | Conductor: .125” | Voltage: 48V | Current: 250A per layer