FEB - Midget
Mersen’s complete line of single and dual pole in-line fuse holders accommodate either 1-1/2" x 13/32" (10 x 38 mm) midget or Class CC fuses. The fuse holders are designed for quick installation. Securing nuts or screws are captive thus speeding installation by reducing the need to locate and assemble loose components in the field. Three internal O-rings per pole seal the fuse holder providing a waterresistant compartment for the fuse. The captive O-rings are colored (blue for single pole and red for dual pole) for quick detection. Optional cone shaped insulator boots can be slipped on to provide a watertight seal (breakaway versions come with boots standard). Both single and dual pole versions have an optional breakaway feature which safely disconnects the load in case of a pole knockdown. Fuses remain safely encapsulated within the watertight fuse holder on the load side. Once the pole has been reinstalled the fuse holder can be easily reconnected.
Mersen’s complete line of single and dual pole in-line fuse holders accommodate either 1-1/2" x 13/32" (10 x 38 mm) midget or Class CC fuses. The fuse holders are designed for quick installation. Securing nuts or screws are captive thus speeding installation by reducing the need to locate and assemble loose components in the field. Three internal O-rings per pole seal the fuse holder providing a waterresistant compartment for the fuse. The captive O-rings are colored (blue for single pole and red for dual pole) for quick detection. Optional cone shaped insulator boots can be slipped on to provide a watertight seal (breakaway versions come with boots standard). Both single and dual pole versions have an optional breakaway feature which safely disconnects the load in case of a pole knockdown. Fuses remain safely encapsulated within the watertight fuse holder on the load side. Once the pole has been reinstalled the fuse holder can be easily reconnected.
Product data sheets
- DS-FEB-FEC-FEX-FEY-Series-600V-In-Line-Fuse-Holders-Mersen
pdf - 507.1 KB
Instructions
- INS-In-Line-Fuse-Holder-Technical-Guide-Mersen
pdf - 3.55 MB
Compliance
- COM-RoHS-RS000028-FEB-Midget-Mersen
pdf - 141.95 KB
- COM-REACH-RE000028-FEB-Midget-Mersen
pdf - 147.09 KB
- COM-REACH-RE000028-FEB-Midget-Mersen
pdf - 147.09 KB
Key features & benefits
Breakaway version quickly disconnects line side during pole knockdown in compliance with state and federal highway commission standards
3 O-rings per pole for water tight applications
Colored O-rings for quick detection
Single and dual poles
Accepts midget or Class CC fuses
Wide assortment of terminal variations
High heat, impact resistant insulator
Captive nut or screw for quick installations
Polarized dual pole provides simultaneous disconnection
Permanently installed neutral versions quickly identified by white nuts
Tulip fuse clip for improved contact and low losses
Environmentally friendly-no lead solder used
Highly visible catalog number even with insulation boots installed
Wire gauge size identified on insulation boots for quick, accurate trimming
Time delay for motor starting and transformer inrush
Applications
Street lighting
Parking lot lighting
Traffic signaling
Sports lighting
Boats and marinas
Humid/corrosive environments
Frequency (Hz) | 50/60 Hz |
Amperage Range | 0 to 30 A |
Fuse Class | Midget |
Short Circuit Current Rating (SCCR) | 100 kA |
Flammability Rating | 94 V-0 |
UL Category Code | IZLT2 |
CSA File Number | Class 6225, File 032169_0_000 |
Reach Compliant | Yes |
Max Operating Temp. | 80 °C |
Max Storage Temp. | 80 °C |
Min Storage Temp. | -25 °C |
Harmonized System | 853690 |
UL File Number | File E52283 |
Reference Finder
Scroll
Item number | Ampere rating | Fuse size | Fuse Type/Class | Number of poles | Indication System | Product weight |
---|---|---|---|---|---|---|
FEB-11-11 See product
|
30A | - | Midget | 1-Pole | No | 0.0454kg |
FEB-11-11-BA See product
|
30A | - | Midget | 1-Pole | No | 0.0907kg |
FEB-11-21 See product
|
30A | - | Midget | 1-Pole | No | 0.0454kg |
FEB-11-21-BA See product
|
30A | - | Midget | 1-Pole | No | 0.0907kg |
FEB-11-31 See product
|
30A | - | Midget | 1-Pole | No | 0.0454kg |
FEB-11-41 See product
|
30A | - | Midget | 1-Pole | No | 0.0454kg |
FEB-11-41-BA See product
|
30A | - | Midget | 1-Pole | No | 0.0907kg |
FEB-11-81-BA See product
|
30A | - | Midget | 1-Pole | No | 0.0907kg |
FEB-11-82 See product
|
30A | - | Midget | 1-Pole | No | 0.0454kg |
FEB-11-82-BA See product
|
30A | - | Midget | 1-Pole | No | 0.0907kg |