Setting Tools
The setting tool is mandatory to maintain your CCD when comes the overhaul time.
The setting tool is mandatory to maintain your CCD when comes the overhaul time.
-
Benefits
Uses of Setting Tools
Mersen Setting Tool’s are designed to be very compact and easy to use. They are customized and adapted to your Current Collector Device. With them, you will set perfectly your CCD to the technical requirements of your network and optimize their use.
High, Low and nominal position can be set, also, the tool include a pressure measurement system to check the pressure of the CCD on the 3rd rail.
This tool is mandatory to succeed in the great overhaul to guarantee a reliable service and longer life time of your CCD fleet.
-
Design Guide
-
Pressure of the shoe
Against the third rail
The setting tool is equipped with a pressure controller to check the pressure of the CCD shoe against the third rail.
-
Manual or Pneumatic retraction
Easy to check
It is easy to check the manual and pneumatic retractions positions with the jig
-
Retraction position indication
Micro contact
If the CCD is equipped with a micro contact to inform the driver of the retracted position of the CCD, you can easy check it.
-
Spare part kits to
guarantee the reliability and increase the life time of your Setting Tools
- cables,
- fuses,
- replacement shoes and arms,
- Hardware and
- all necessary components -
Training and assistance
Support
Mersen Design team is available to support your design and maintenance team’s especially for the smart and connected functions.
Mersen Service team can train your Maintenance team to make the setting and the maintenance of your installations all around the world. -
LCC; RAMS; Type tests
Tests and studies
Mersen team provide type test and different studies (Life Cycle Cost, RAMS, FMEA, Eco Design and recyclability, etc…) to secure the reliability of your CCD solution and its conformity to standards and legislations.
-
-
Maintening your CCD
- Compact and manual retraction w/o Fuse box
- Compact and manual retraction including Fuse box
- Compact and Pneumatic retraction w/o fuse box
- Compact and Pneumatic retraction including fuse box
- Fixed on beam
- Positive fuse box included
- Positive Track with separate Fuse box
- Negative (sliding on the track)
- Negative (sliding on a lateral rail)
- Dual lateral contact
- Monorail
- Static Contact (tramway and electrical buses) ground and roof
- Sliding Contact (tramway)
- Fuse boxes
- Connection boxes
- On-board Disconnectors and Inverters
- Surge arresters
- Grounding devices (ERCU’s)
- On-board Energy measurement
- On-board Resistors
- Spare parts
- Training
- Steel wheel Metro (Paris, Singapore, Tokyo, New York, Buenos Aires, Mexico, Madrid, Bangalore, Beijing, Alger, Cairo, Istanbul, …)
- Pneumatic wheel Metro (Paris, Montreal, Santiago of Chile),
- Monorail (Las Vegas)
- Driverless metro applications (Toulouse, Lille, Roissy Airport, Orly Airport, Turino, Seoul airport, Taipei, Chicago, …)
- Catenary less tramway (Luxemburg, Nice, Saragossa)
- Electrical buses (under test)