Product
STXT240D20A
SPD - Type 1 ST-XT Series 240V L-L VPR 2000V L-L MCOV 640V 200 kA LED + Audible
Providing the widest range of circuit protection products in the industry means that we offer solutions for everyone from OEMs and panel builders to MROs and electrical contractors either directly or via electrical distributors.
All products
Filters
711 products
Product
STXT240H10
SPD - Type 1 ST-XT Series 240/120V L-L VPR 1000V L-L MCOV 300/470V 100 kA LED
Product
STXT240H10A
SPD - Type 1 ST-XT 240/120V L-L VPR 1000V L-L MCOV 300/470V 100 kA LED + Audible
Product
STXT240H20
SPD - Type 1 ST-XT Series 240/120V L-L VPR 1000V L-L MCOV 300/470V 200 kA LED
Product
STXT240H20A
SPD - Type 1 ST-XT 240/120V L-L VPR 1000V L-L MCOV 300/470V 200 kA LED + Audible
Product
STZ480Y45BXT
SPD - Type 1 STZ 480V Y 450kA BXT
Series
25kA - 25mm TPMOV (Thermally Protected MOV)
Mersen’s TPMOV technology eliminates common failure
modes that occur in the field with standard metal oxide varistors.
Internally each component is comprised of a voltage clamping device and
a disconnecting apparatus that monitors the status of the metal oxide
disc making the TPMOV surge suppression component a fail-safe device. Upon failure the TPMOV surge suppression component is
also equipped with a visual pin indicator as well as a normally open
micro-switch providing remote indication, if applicable. Mersen’s
25TPMOV series surge suppression component is rated for 25kA - 8/20μs peak surge current and is
available for maximum continuous operating voltages (MCOV) from
150V to 320VAC.
modes that occur in the field with standard metal oxide varistors.
Internally each component is comprised of a voltage clamping device and
a disconnecting apparatus that monitors the status of the metal oxide
disc making the TPMOV surge suppression component a fail-safe device. Upon failure the TPMOV surge suppression component is
also equipped with a visual pin indicator as well as a normally open
micro-switch providing remote indication, if applicable. Mersen’s
25TPMOV series surge suppression component is rated for 25kA - 8/20μs peak surge current and is
available for maximum continuous operating voltages (MCOV) from
150V to 320VAC.
Product
25TPMOVSL150
SPD - TPMOV 150V Short Leads Microswitch 25 kA 500 pk
Product
25TPMOVSL320
SPD - TPMOV 320V Short Leads Microswitch 25 kA 500 pk
Series
75kA and 50kA - 34mm TPMOV (Thermally Protected MOV)
Mersen’s TPMOV technology eliminates common failure modes that occur in the field with standard metal oxide varistors. Internally each unit is comprised of a voltage clamping device and a disconnecting apparatus that monitors the status of the metal oxide disk, making the TPMOV surge suppression component a fail-safe device. In the event of an overvoltage breakdown, the metal oxide disc is securely disconnected from the system power by an arc shield. Upon failure, the TPMOV surge suppression component is also equipped with a visual pin indicator as well as a normally open micro-switch, providing remote indication if applicable.
TPMOV7 series surge suppression component: 50% more surge capacity, in the same footprint
The TPMOV7 series is rated for 75kA - 8/20μs peak surge current and is available for maximum continuous operating voltages (MCOV) from 150V to 320VAC.
The TPMOV7 series is rated for 75kA - 8/20μs peak surge current and is available for maximum continuous operating voltages (MCOV) from 150V to 320VAC.