Product
S1022964 - 1.002.874
Cover shield MB00 231x210mm for two 00.ST9/00.RST9
Mersen's wide range of accessories
All products
Filters
439 products
Product
Q1024618 - 22SZVK42
Cable termination for FSD V-term.clamp f. 2 cables NH1-3
Product
R211523 - 00SZA70
Cable termination for FSD Set of 3 AlCu70mm² clamp NH00
Product
S1023447 - 1.002.647
Cable termination for FSD Set of 30 M10 insert nut NH1
Product
V1033684 - 1.003.571
Cable termination for FSD Set of 3 Al/Cu clamp 00 50-95²
Product
W1023450 - 1.002.646
Cable termination for FSD Set of 30 M8 insert nut NH00
Product
Y1024579 - 1.003.377
Cable termination for FSD Kit of top terminal NH1-3
Series
Wiring bars / Power supply for DIN Fuse Switch Disconnectors
Fork Design
Wiring bars in fork design are ideal for the wiring of modular panel-mounting devices as per DIN 43880 with flat-type, dual-function or single-screw terminals.
Additional incoming terminals are required when wiring devices with flat-type or single-screw terminals.
In contrast, devices with dual-function terminals allow bar connection to the top section of the terminal with simultaneous incoming supply in the bottom section.
The use of end caps on multi-pole wiring bars guarantees optimum shock-hazard protection and prevents arcing at bar ends.L@£Pin Design
Wiring bars in pin design are ideal for the wiring of modular panel-mounting devices to DIN 43880 with box terminal, frame terminal or two-scre clamp.
The incoming supply to the wiring-bar system is provided over additional incoming terminals.
Wiring bars in fork design are ideal for the wiring of modular panel-mounting devices as per DIN 43880 with flat-type, dual-function or single-screw terminals.
Additional incoming terminals are required when wiring devices with flat-type or single-screw terminals.
In contrast, devices with dual-function terminals allow bar connection to the top section of the terminal with simultaneous incoming supply in the bottom section.
The use of end caps on multi-pole wiring bars guarantees optimum shock-hazard protection and prevents arcing at bar ends.L@£Pin Design
Wiring bars in pin design are ideal for the wiring of modular panel-mounting devices to DIN 43880 with box terminal, frame terminal or two-scre clamp.
The incoming supply to the wiring-bar system is provided over additional incoming terminals.
Product
G1058305 - 1.004.402
Cable termination for FSD Set of 4 V-clamp 70-240mm² NH1-3
Product
H1058306 - 1.004.403
Cable termination for FSD Set of 4 V-clamp 70-300mm² NH1-3